bConference System, CCTV, Public Address, PABX & Telephone, Tele-Conference, Intrusion / Alarm System, Access Control, Metal Detector
Conference System , CCTV, Public Address, PABX & Telephone, Tele-Conference, Intrusion / Alarm System, Access Control, Metal Detector

Fire Alarm System BOSCH » Semi Addressable (FPA-1200)

Urut berdasarkan

FPA-1200-C-APR | Fire panel

FPA-1200-C-APR | Fire panel
  • Easy upgrade to 2 loops by second LSN 0300 A module
  • Connection of up to 254 elements (127 per loop)
  • Max. 2 LSN 0300 A Modules allowed
  • Operating voltage 20 V DC to 30 V DC
  • Dimensions (H x W x D) 638 mm x 440 mm x 149 mm

detail

FMR-5000-C-13 | Remote keypad

FMR-5000-C-13 | Remote keypad
  • Convenient remote operation of fire panel identical to Panel Controller
  • Multi-color display
  • 12 LEDs displaying the operating status of the system
  • Surface and flush mounting

detail

IOP 0008 A | Input/Output Module

IOP 0008 A | Input/Output Module
  • Interface for electrically isolated inputs and outputs
  • Ready to go thanks to plug-and-play technology and pluggable terminal blocks
  • The IOP 0008 A Input/Output Module has eight independent digital inputs and eight open collector outputs for individual displays or flexible connection of various electrical devices.

detail

RML 0008 A | Relay Module

RML 0008 A | Relay Module
  • 8 freely programmable relay outputs
  • Ready to go thanks to plug-and-play technology and pluggable terminal blocks
  • The module has eight change-over contact relays (type C) to provide potential-free output contacts.
  • Each of the eight relays has an NO (normally open) and an NC (normally closed) contact.
  • The maximum relay contact load is 30 V DC/1 A.

detail

IOS 0232 A | RS232 Communication Module

IOS 0232 A | RS232 Communication Module
  • Connection of peripherals with RS232 serial interface
  • Ready to go thanks to plug-and-play technology and pluggable terminal blocks
  • The RS232 Communication Module can be used to connect two devices, e.g. voice alarm system Plena, a laptop or a printer, via two independent serial interfaces.

detail

FLM‑420‑NAC‑D | Signaling Device Interface Module

FLM‑420‑NAC‑D | Signaling Device Interface Module
  • with 1 supervised output line for conventional signaling devices,
  • for installation on a DIN rail with adapter
  • Signaling Device Interface Modules make it possible to monitor and activate a group of signaling devices (NAC = Notification Appliance Circuit) in the Local SecurityNetwork LSN
  • This means one signaling device line can be connected to LSN fire panels. The following can be connected:
    - Sounders
    - Strobes
    - Horns

detail

FLM‑420/4‑CON‑D | Conventional Interface Module 4‑wire LSN

FLM‑420/4‑CON‑D | Conventional Interface Module 4‑wire LSN
  • With 2 primary lines for 2- or 4-wire conventional detectors, type DIN rail
  • Can be connected to the fire panels FPA‑5000 and FPA‑1200 and the classic LSN fire panels BZ 500 LSN, UEZ 2000 LSN and UGM 2020
  • Can be used with a wide range of conventional detectors
  • Monitoring of primary lines for alarms, short circuits and wire breaks
  • Conventional detectors can be connected in two stubs or one loop
  • Individual detector parameters can be programmed for each stub
  • Maintains LSN loop functions in the event of wire interruption or short-circuit thanks to two integrated isolator

detail