Modular Fire Alarm (FPA-5000)

BCM 0000 A | Battery Controller Module

CPH 0006 A can accommodate an MPC Operating and Display Unit with Panel Controller, up to six modules, two 12 V/45 Ah batteries, and a Power Supply. The Power Supply Bracket is fitted ex-works.
for surface-mounting or installation in 482.6 mm (19") racks

used to redundantly connect one Panel Controller to an additional MPC Panel Controller
Cable Set CRP 0000 A is used to redundantly connect a Panel Controller to an additional MPC Panel Controller in accordance with EN 54 Part 2 for systems with more than 512 elements.

Analog addressable detector with one optical sensor, manually and automatically addressable
Operating voltage 15 V DC to 33 V DC
Current consumption < 0.55 mA
Alarm output Per data word by two-wire signal line
Indicator output Open collector connects 0 V over 1.5 kΩ through, max. 15 mA
Material Plastic, ABS (Novodur)

FLM‑420‑I8R1‑S Octo-input Interface Module with Relay allows the monitoring of up to eight inputs
Additionally, it features a change‑over contact relay for providing a potential‑free output contact
It is a 2‑wire LSN element. When connected to the fire panels FPA‑5000 and FPA‑1200, the interface module offers the enhanced functionality of LSN improved technology
The FLM‑420‑I8R1‑S Octo‑input Interface Module provides two monitoring functions:
1. Monitoring of a line by an EOL resistor
2. Monitoring of a potential‑free contact
The monitoring functions of the eight inputs can be selected individually by setting the corresponding addresses

Analog addressable manual call point with glass pane for indoor use, indirect alarm triggering (type B), red
Individual identification thanks to automatic or manual detector addressing
Indicator LED for alarm or for inspection evaluation
Dimensions W x H x D (mm) 135 x 135 x 40

HCP 0006 A can accommodate an MPC Operating and Display Unit with Panel Controller, up to six modules, as well as batteries and Power Supplies
for surface-mounting, flush-mounting or installation in 482.6 mm (19") racks.

Central control element of the system with multi-color LCD touch‑screen
Panel Controller is the central element of the system, which shows all messages on the display
Interconnection of up to 32 Panel Controllers, Remote Keypads and OPC server
Ethernet interfaces for networking and OPC connection
Multi-color TFT touch-screen of 14.5 cm (5.7”) with 22 fixed keys for standard input

Panel Rail Short has two module slots. Due to its hidden position behind the Operating and Display Unit with Panel Controller, the Panel Rail Short is intended for mounting of the following modules without operating and display elements:
- BCM-0000-B Battery Controller Module
- IOS 0020 A and IOS 0232 A Communication Modules
Material ABS plastic, Polylac PA-766 (UL94 V‑0)

UPS Power Supply Unit is a plug-and-play power supply for the entire power supply to the control panel.
Input voltage 100 V AC ... 240 V AC
Output voltage 26 V DC ... 29 V DC (temperature-dependant) Nominal 26.8 V DC at 40°C
Max. output current 6 A
Housing material Aluminum, anodized
Dimensions Approx. 200 x 100 x 40 mm (7.9 x 3.9 x 1.6 in.)

The Annunciator Module has 16 red and 16 yellow LEDs for displaying the operating states of 16 definable detection points.
Input voltage 20 V DC to 30 V DC 5 V DC ± 5%
Max. current consumption , Standby (all LEDs off) 6 mA (at 24 V DC) ; All LEDs on 26 mA (at 24 V DC)

Used to connect a battery pair and a Power Supply Housing to the BCM‑0000‑B Battery
The connection cable from the BCM‑0000‑B Battery Controller Module to the batteries is 180 cm long

Used to connect the BCM‑0000‑B Battery Controller Module to a UPS Power Supply, cable length 150 cm

Analog addressable heat detector with one thermal sensor, manually and automatically addressable
Operating voltage 15 V DC to 33 V DC
Current consumption < 0.55 mA
Alarm output Per data word by two-wire signal line
Indicator output Open collector connects 0 V over 1.5 kΩ through, max. 15 mA
Material Plastic, ABS (Novodur)

analog addressable strobe, red
LSN Detector Base Sounders providing a combination of visual and acoustic signaling
Mounted on the MS 400 Detector Base, the FNS-420-R can be used as a strobe without acoustic signaling
Operating voltage 28 V DC (15 to 33 V DC)
Dimension (H x W) 40 x 99.5 mm

HBC 0010 A can accommodate an MPC Operating and Display Unit with Panel Controller, up to ten modules, as well as batteries and Power Supplies
for surface-mounting, flush-mounting or installation in 482.6 mm (19") racks

MPH 0010 A can accommodate an MPC Operating and Display Unit with Panel Controller as well as up to 10 module
for surface-mounting or installation in 482.6 mm (19") racks

A control panel can be equipped with up to four optional Address Cards each containing 64 addresses depending on requirements
Up to four cards in one control panel